We repair Baumer Encoder HOG86.2 P16-017-1 used in ABB Generators. The unit failed to give stable feedback signals. Testing revealed faulty sensor elements, IC failures, and capacitor damage. Our engineers repaired and replaced the faulty parts. After repair, the encoder was tested under company-level standards. It then delivered precise and dependable performance.
Note: We are not manufacturers, we only repair.

We repair Baumer Slipring Encoders (GI355.Z40) with signal loss and inaccurate feedback issues. Testing revealed sensor faults, slipring wear, and power circuit problems. These caused unstable output during machine operation. Micro-level repairs and component replacement were performed. After calibration and testing, the encoder worked accurately. The unit is suitable for industrial use.
Note: We are not manufacturers; we only repair.

We repair Baumer Hubner Encoder – OG 8 DN2048 CI with issues such as signal loss, inaccurate feedback, communication errors, power supply faults, and intermittent operation. Testing identified damaged electronic components, encoder signal processing issues, internal connection faults, and wear-related problems that affected reliable performance. Our engineers carried out micro-level, component-level repairs. After complete functional and accuracy testing, the encoder operated properly and reliably. The unit is suitable for industrial use.
Note: We are not manufacturers; we only provide repair and servicing support.

We carried out testing on a Baur IRG 32 Panel that had control instability and power faults. Diagnosis revealed faulty regulators and defective ICs. After repairs and load testing, the panel performed reliably in simulated conditions.
Note: We are not manufacturers, we only repair.

We repair Becker 22KW 3 Phase AC Drive (Model SK22000-3CT) that failed in power and motor control. Testing revealed IC faults, regulator issues, and capacitor damage. Our engineers repaired the circuits and replaced faulty parts. After repair, the drive performed reliably with stable operation.
Note: We are not manufacturers, we only repair.

We are repair and servicing Beckhoff CX5020 Communication Modules with accuracy. Our team identifies faults in communication circuits, performs component-level replacement, and ensures stable connectivity after repair. If you want to repair such modules, we can provide the service. We are not the manufacturer – we only provide repair services.

We repair Beckhoff IPS units experiencing boot failure and power instability. Diagnostics identified faulty power modules, damaged ICs, and interface circuit issues. These affected system reliability. Our engineers performed micro-level repairs. After functional testing, the IPS operated normally. The unit is ready for industrial application.
Note: We are not manufacturers; we only repair.

We repair Exter T100 HMI that had a dead display and unresponsive keys. Circuit testing revealed defective driver ICs, faulty capacitors, and regulator problems. These faults prevented the HMI from operating correctly in its system. We carried out micro-level repairs and replaced damaged components. The HMI was then tested in multiple cycles for performance verification. After repair, the unit worked reliably with stable operation.
Note: We are not manufacturers, we only repair.

We are repairing BKK Engineering Board Regler RD3, which faced irregular voltage regulation and control failures. Our engineers carried out detailed diagnosis to identify defective capacitors, ICs, and regulators. Once repaired, the board operated consistently with dependable performance. If you need repair for such boards, contact us. Please note, we are not manufacturers — we are doing only repair.

We repair Brandenburg DN1100-10 Power Supply that failed with unstable voltage output. Testing revealed IC faults, capacitor failures, and regulator issues. Our engineers repaired the circuits and replaced defective components. After repair, the unit delivered stable and reliable performance.
Note: We are not manufacturers, we only repair.