We repair Buchi Heating Bath B-490 that failed in heating and control accuracy. Testing showed regulator faults, IC issues, and capacitor failures. Our engineers repaired the power circuits and replaced defective parts. After repair, the unit was tested thoroughly and worked with dependable heating control.
Note: We are not manufacturers, we only repair.

The Bystronic Diocom Card failed with power sequencing errors. Micro-level inspection detected damaged drivers and regulator circuitry. With precise rework, the card regained proper performance. Our work is focused on repair services, not making new boards.

We are doing repair of Bystronic PCB Cards used in air plasma cutting machines, which were showing control errors and unstable functions. Our engineers carried out deep circuit checks and detected power and driver IC faults. After repair, the card provided consistent industrial operation. We are doing only repair, not manufacturing.

This Bystronic Laser CPU Board developed frequent system halts and failed boot sequences. Our engineers traced the fault to damaged processor circuits and clock drivers. Once repaired, the CPU board worked reliably under continuous load. Repair is our expertise — we do not manufacture.

We are repair Bystronic Power Supply Card that had malfunction issues. Our engineers analyzed processor and regulator stages. Defective parts were replaced with quality-tested components. The board is now functioning properly after repair. Please note, we are not manufacturers — we are doing only repair.

We repair Buchi equipment PCBs experiencing control malfunction and power-related issues. Testing revealed faulty ICs, damaged components, and power circuit defects. These issues affected system stability during operation. Micro-level repairs were performed and components replaced. After functional testing, the unit worked correctly. It is suitable for laboratory and industrial use.
Note: We are not manufacturers; we only repair.

We repair Busless Cards of Waters Alliance 2695 with communication errors and signal instability. Diagnostics identified interface IC faults, power section issues, and damaged components. These caused improper system communication. Our engineers performed micro-level repairs. After testing and calibration, the card functioned accurately. The unit is ready for use again.
Note: We are not manufacturers; we only repair.

We repair B-Command Rotary Limit Switch FRM which had mechanical faults and unstable signal output. Testing revealed worn contacts, defective gears, and damaged electronic components. These faults caused incorrect position feedback in automation systems. Our team carried out precision repairs and replaced damaged parts. After calibration and repeated testing, the switch performed accurately. The repaired unit achieved reliable operation in its industrial application.
Note: We are not manufacturers, we only repair.

We specialize in repairing power supply cards, including various models and configurations. Our team of skilled engineers carefully analyzed the processor and regulator stages of the malfunctioning unit. After diagnosing the issues, we replaced the defective components with high-quality, tested parts.

Following the repair, extensive testing was conducted to ensure the card is now functioning as intended.

Please note: We are not the manufacturers of the power supply card. We provide only repair services for this and similar models.