We repair Buchi equipment PCBs experiencing control malfunction and power-related issues. Testing revealed faulty ICs, damaged components, and power circuit defects. These issues affected system stability during operation. Micro-level repairs were performed and components replaced. After functional testing, the unit worked correctly. It is suitable for laboratory and industrial use.
Note: We are not manufacturers; we only repair.

We repair Breaker Relay RGU-10 with issues such as tripping faults, sensing errors, communication problems, power supply faults, and intermittent operation. Testing identified damaged electronic components and internal connection faults affecting reliable performance. Our engineers carried out micro-level, component-level repairs. After complete functional testing, the relay operated properly and reliably. The unit is suitable for industrial use.
Note: We are not manufacturers; we only provide repair and servicing support.

We repair Busless Cards of Waters Alliance 2695 with communication errors and signal instability. Diagnostics identified interface IC faults, power section issues, and damaged components. These caused improper system communication. Our engineers performed micro-level repairs. After testing and calibration, the card functioned accurately. The unit is ready for use again.
Note: We are not manufacturers; we only repair.

We repair B-Command Rotary Limit Switch FRM which had mechanical faults and unstable signal output. Testing revealed worn contacts, defective gears, and damaged electronic components. These faults caused incorrect position feedback in automation systems. Our team carried out precision repairs and replaced damaged parts. After calibration and repeated testing, the switch performed accurately. The repaired unit achieved reliable operation in its industrial application.
Note: We are not manufacturers, we only repair.

We repair Baumer Incremental Encoders with faults such as signal failure and inaccurate feedback. Testing revealed sensor and connection issues. Our engineers carried out micro-level repairs. After testing, the encoder functioned reliably. Suitable for industrial use.
Note: We are not manufacturers; we only provide repair and servicing support.

We repair Baumer Resolver units with issues like signal distortion and position errors. Testing found internal faults and damaged components. Our engineers performed detailed repairs. After testing, the unit operated accurately. Suitable for industrial use.
Note: We are not manufacturers; we only provide repair and servicing support.

We specialize in repairing power supply cards, including various models and configurations. Our team of skilled engineers carefully analyzed the processor and regulator stages of the malfunctioning unit. After diagnosing the issues, we replaced the defective components with high-quality, tested parts.

Following the repair, extensive testing was conducted to ensure the card is now functioning as intended.

Please note: We are not the manufacturers of the power supply card. We provide only repair services for this and similar models.

We repair Blade Wheel Encoder units with issues such as signal output failure, position sensing errors, feedback loss, and intermittent operation. Testing identified damaged sensors, faulty electronic components, and internal connection problems affecting accuracy. Our engineers carried out micro-level repairs to restore reliable encoder performance. After thorough testing, the encoder operated accurately and consistently. The unit is suitable for industrial use.

Note: We are not manufacturers; we only provide repair and servicing support.