We repair Leine Linde Encoder (Model: 703) that was not giving correct output signals. During testing, faulty ICs, sensor head issues, and power circuit faults were identified. These caused signal instability during machine operation. Our engineers repaired the unit at micro-level and replaced defective components. After completing calibration and testing, the encoder worked with high accuracy. The repaired unit was suitable for industrial use again.
Note: We are not manufacturers, we only repair.

We repair LH Teknik Aps Automatic Voltage Controller (Type AVC 2000) that showed unstable regulation and tripping faults. Testing confirmed IC problems, regulator damage, and capacitor faults. Our engineers repaired the circuits and replaced defective parts. After detailed testing, the controller achieved stable and reliable operation.
Note: We are not manufacturers, we only repair.

We are repair Lambda FW G0050 Power Supply which had frequent shutdowns and unstable regulation. Engineers inspected the circuits carefully to locate defective components. Faulty regulators and weak capacitors were replaced using proper methods. The power supply performed steadily after load tests. Please note, we are not manufacturers — we are doing only repair.

We repair Lambrecht Meteo Wind Speed Sensor that was showing incorrect readings and frequent dropouts. Testing confirmed sensor faults, capacitor issues, and IC problems. These affected the reliability of weather monitoring. We repaired the circuits and replaced faulty parts with care. After calibration and testing, the sensor provided accurate and stable output. The unit was restored for continuous environmental monitoring.
Note: We are not manufacturers, we only repair.

We are doing repair of LANGE CPU Board, which was not responding properly and showed irregular processing. Our engineers tested the board and located faulty ICs, capacitors, and power regulation faults. After professional repairs, the board functioned with smooth and stable performance. If you need repair of this type of CPU board, contact us. Please note, we are not manufacturers — we are doing only repair.

We are repair Leader Electronics 5V 2Amp SMPS that was not regulating properly. Our engineers performed detailed circuit testing. Defective components were replaced during repair. The SMPS achieved stable output after rechecking. Please note, we are not manufacturers — we are doing only repair.

We repair Lico 500 Spectral Colorimeter that showed unstable readings and display problems. Testing confirmed IC failures, regulator damage, and capacitor faults. These disturbed measurement accuracy. Our engineers repaired the circuits with precision and replaced faulty parts. After repair, the device was tested for reliable accuracy and smooth operation.
Note: We are not manufacturers, we only repair.

We repair LINDE Encoder (Ser. No. 30146171) which had faults in signal transmission and output stability. Testing confirmed IC failures, capacitor faults, and regulator damage. Our team repaired the circuits and replaced defective components. After repair, the encoder was tested under load and worked with dependable accuracy.
Note: We are not manufacturers, we only repair.

We repair Lineage Power CAR1248FP Power Supply that failed with unstable voltage and startup faults. Testing revealed IC faults, capacitor issues, and regulator failures. Our engineers repaired the circuits and replaced defective components. After repair, the power supply worked reliably with stable output.
Note: We are not manufacturers, we only repair.

We are repair Lite-On Power Supply PS-5161-4HP that was showing irregular voltage and unstable output. Engineers analyzed the circuits including regulator ICs, switching modules, and I/O stages. Faulty parts were replaced using precision engineering techniques for reliability. After detailed testing, the supply delivered safe and consistent operation. Please note, we are not manufacturers — we are doing only repair.