We repair WAINTEK Make HMI (Model: MT607EMQV) that had a dead display and power-up failure. Testing revealed defective capacitors, regulator faults, and driver IC damage. These prevented the unit from functioning. Our engineers repaired the circuits and replaced the damaged components. After repair, the unit was tested thoroughly for reliability. The HMI performed well and achieved stable industrial operation.
Note: We are not manufacturers, we only repair.

We repair Warner Power Make Zion Lamp SMPS that failed in lamp voltage regulation and startup. Testing revealed IC faults, capacitor damage, and regulator failures. Our engineers repaired the circuits and replaced defective parts. After repair, the SMPS worked reliably with stable lamp output.
Note: We are not manufacturers, we only repair.

We are repair and servicing Waters 2695 Injector Boards. Our team inspects injector control electronics, repairs circuit issues, and tests functionality with HPLC systems. If you want to repair such boards, we can provide the service. We are not the manufacturer – we only provide repair services.

This Waters 1505 Detector CPU Board faced frequent freezing during operation. Micro-level inspection detected faulty capacitors and bus control circuits. Replacement and validation restored its accuracy in analysis tasks. We are service providers for repair — not the manufacturer.

We are repairing Waters Preparative HPLC System’s CPU Board that faced frequent signal errors and power instability. Our team tested the board thoroughly, detecting defective chips, regulators, and memory sections. After component replacement and validation, the CPU board performed with stable accuracy in lab processes. If you need repair of such CPU boards, contact us. Please note, we are not manufacturers — we are doing only repair.

We are repair and servicing Waters Pump Control Modules. Our repair involves component-level fault tracing, repair or replacement of defective circuits, and performance validation. Each module is tested for reliable operation and restored to provide accurate pump control.
We are not the manufacturer – we only provide repair services.

We handled the repair of a Waters 2414 Refractive Index Detector CPU Board that showed irregular signal output. Our team conducted detailed testing and traced faults in the IC pathways and memory section. Once components were replaced and validated, the board operated with consistent precision. We provide repair services for such analytical CPU boards. Please note, we are not manufacturers — we only do repair.

We are doing repair of CPU Boards used in PDA Detectors, which were showing signal distortion and operational errors. Component-level checks revealed regulator faults and defective ICs. After repair, the board functioned smoothly in analytical systems. We are not manufacturers — only repair service.

We are repairing Waters Bus Lase Control Boards that faced frequent communication and power issues. Our engineers detected IC and driver faults at the circuit level. With proper repair, the board functioned steadily in HPLC systems. If you need repair of such boards, contact us. Please note, we are not manufacturers — we are doing only repair.

A Waters CPU Board arrived with issues of communication dropouts and unstable power supply. Engineers performed a detailed fault analysis, detecting problems in bus drivers and capacitors. Following rework, the board ran reliably in analytical applications. We provide repair only.