We tested a Windtec Operating Panel that had communication errors and display freezing. Testing confirmed defective capacitors and corrupted ICs. After component-level repair and repeated testing, the panel achieved stable operation.
Note: We are not manufacturers, we only repair.

We repair Pulling Machine Display that failed to power up and showed distorted output. Our engineers performed in-depth testing and identified regulator faults along with defective capacitors. These issues caused unstable performance in the machine. With precision repair, we replaced all faulty parts and corrected the circuits. The display was then tested in multiple cycles to confirm stability. After successful testing, the display became fully functional for continuous industrial operation.
Note: We are not manufacturers, we only repair.

We repair Mitsubishi Make HMI that had major display issues and unstable operation. During detailed testing, our team detected faulty ICs, damaged capacitors, and irregularities in the power supply section. These faults caused frequent malfunctions during use. We carried out micro-level diagnosis to ensure no hidden damage was left. After replacing the defective components, the unit was tested under industrial conditions. The HMI then achieved reliable performance and was ready for use again.
Note: We are not manufacturers, we only repair.

We repair SÜTRON electronic GmbH HMI (Type: TPEO57ATQ/107069000-00) which suffered from communication errors and display malfunction. Our team tested the HMI at component level and detected IC failures along with power regulation problems. These issues affected proper system connectivity and stable display. After replacing the faulty ICs and repairing the power circuits, we conducted thorough testing. The HMI regained stable and dependable operation for industrial applications.
Note: We are not manufacturers, we only repair.

We repair Display of Polari Meter which showed screen failure and unstable readings. Our detailed analysis highlighted faulty driver ICs and damaged capacitors inside the unit. These problems caused inaccurate and fluctuating outputs. By carrying out micro-level repair, we corrected the faults and replaced the defective components. After this, we performed performance testing to ensure accurate readings. The display then worked reliably with stable output in its application.
Note: We are not manufacturers, we only repair.

We repair Atlas Copco Elektronikon HMI (Serial: SRN1639A01518) that had power-up failure and unstable signals. Component-level testing revealed defective capacitors and problems in the power regulation. These faults prevented the unit from functioning correctly. Our engineers replaced all damaged components and corrected the power section. The unit was then tested repeatedly under company-level standards. After repair, the HMI achieved stable and consistent performance.
Note: We are not manufacturers, we only repair.

We repair Mettler Toledo HMI (Serial: B340848276) which had frequent freezing and touchscreen malfunction. During circuit testing, damaged ICs and faulty capacitors were identified. These issues disrupted smooth functioning of the HMI. Our team carried out micro-level repairs and replaced the defective parts. After completing the repair, the unit was tested thoroughly for reliability. The HMI then worked smoothly with stable performance in its application.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView Plus 1000 that suffered from booting issues and unresponsive touchscreen. Our engineers carried out detailed analysis and found damaged flash ICs and regulator faults. These defects caused the system to fail during operation. We replaced the defective ICs and repaired the regulator circuit. After the repair, the HMI was thoroughly tested for performance and stability. The unit delivered reliable operation and was ready for use in automation systems.
Note: We are not manufacturers, we only repair.

We repair Level Indicator which was showing incorrect readings and frequent signal loss. Through micro-level testing, we detected regulator faults and several defective electronic components. These issues affected the reliability of the indicator in its industrial application. We replaced the faulty parts and corrected the power regulation. The repaired unit was then tested in repeated cycles for stability. After successful verification, the level indicator achieved accurate and consistent performance.
Note: We are not manufacturers, we only repair.

We repair Shimadzu LC-2030 Display that had unresponsive functions and backlight failure. The testing process revealed faulty memory sections and power circuit issues. These faults caused the display to remain inactive during usage. Our engineers performed component replacement and corrected the damaged circuitry. After repair, the display was tested multiple times under lab conditions. The Shimadzu display then performed reliably and was ready for accurate laboratory use.
Note: We are not manufacturers, we only repair.