We repair Siemens SIMATIC Panel which had black screen issues and failed to respond to inputs. Detailed testing highlighted memory IC faults, damaged capacitors, and regulator problems. These caused malfunctions during automation processes. Our engineers carried out repairs with micro-level precision. After replacing the defective components, the panel was tested thoroughly. The SIMATIC panel then delivered smooth and reliable performance.
Note: We are not manufacturers, we only repair.

We repair Collin Power Panel 300 which was not powering on and had unstable communication. During testing, our engineers identified power regulation faults, damaged capacitors, and IC problems. These issues caused frequent errors in machine operation. We replaced the defective components and corrected the circuits. After the repair, the panel was tested under company-level standards. The unit achieved stable and reliable functionality for industrial use.
Note: We are not manufacturers, we only repair.

We repair Mitsubishi Make HMI (Type - 06701C, 602221103, Name - E1032) that showed a black screen and unresponsive keys. Testing revealed faulty driver ICs and power supply faults in the unit. These issues made the HMI unusable in operations. We replaced the defective ICs and corrected the power section. After repair, the HMI underwent repeated testing under industrial load. The unit achieved stable functionality and was ready for industrial use.
Note: We are not manufacturers, we only repair.

We repair Kaeser Sigma Control Panel that suffered from frequent shutdowns and communication errors. Our testing confirmed regulator faults, capacitor damage, and defective ICs. These issues disturbed smooth compressor operation. The faulty parts were replaced, and the circuits were corrected carefully. After repair, the panel was tested under industrial load conditions. The unit achieved stable and dependable performance.
Note: We are not manufacturers, we only repair.

We repair Exter T100 HMI that had a dead display and unresponsive keys. Circuit testing revealed defective driver ICs, faulty capacitors, and regulator problems. These faults prevented the HMI from operating correctly in its system. We carried out micro-level repairs and replaced damaged components. The HMI was then tested in multiple cycles for performance verification. After repair, the unit worked reliably with stable operation.
Note: We are not manufacturers, we only repair.

We repair Elektronikon Controller (Atlas Copco) that was not starting and showed unstable signals. Testing revealed defective capacitors, regulator issues, and IC failures. These prevented proper system operation in compressors. We carried out component replacement and corrected the power circuits. After multiple rounds of testing, the controller performed with stability. The repaired unit was ready for reliable industrial use.
Note: We are not manufacturers, we only repair.

We repair Yamato Make HMI that failed with screen distortion and unstable signals. During detailed testing, our engineers found damaged driver ICs and faulty capacitors. These issues disturbed the display and input functions. We replaced the defective parts and carried out fine-level repairs. After successful testing, the HMI worked reliably and delivered smooth operation in its system.
Note: We are not manufacturers, we only repair.

We repair GEA Niro Soavi Make HMI (Schneider Electric) which had display failure and unstable operation. Circuit testing revealed faulty driver ICs, damaged capacitors, and regulator faults. These problems caused the HMI to stop working during use. Our engineers carried out precise component-level repairs and replaced damaged parts. After repair and repeated testing, the HMI worked with stable and smooth functionality.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView Plus 400 HMI that was unresponsive and not booting. Testing showed regulator faults, flash IC problems, and capacitor failures. These issues prevented the unit from starting up properly. We repaired the circuits and replaced the defective ICs. The HMI was tested in multiple cycles for reliable performance. After repair, it operated smoothly in industrial systems.
Note: We are not manufacturers, we only repair.

We repair WAINTEK Make HMI (Model: MT607EMQV) that had a dead display and power-up failure. Testing revealed defective capacitors, regulator faults, and driver IC damage. These prevented the unit from functioning. Our engineers repaired the circuits and replaced the damaged components. After repair, the unit was tested thoroughly for reliability. The HMI performed well and achieved stable industrial operation.
Note: We are not manufacturers, we only repair.