We repair Yamato Make HMI that failed with screen distortion and unstable signals. During detailed testing, our engineers found damaged driver ICs and faulty capacitors. These issues disturbed the display and input functions. We replaced the defective parts and carried out fine-level repairs. After successful testing, the HMI worked reliably and delivered smooth operation in its system.
Note: We are not manufacturers, we only repair.

We repair GEA Niro Soavi Make HMI (Schneider Electric) which had display failure and unstable operation. Circuit testing revealed faulty driver ICs, damaged capacitors, and regulator faults. These problems caused the HMI to stop working during use. Our engineers carried out precise component-level repairs and replaced damaged parts. After repair and repeated testing, the HMI worked with stable and smooth functionality.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView Plus 400 HMI that was unresponsive and not booting. Testing showed regulator faults, flash IC problems, and capacitor failures. These issues prevented the unit from starting up properly. We repaired the circuits and replaced the defective ICs. The HMI was tested in multiple cycles for reliable performance. After repair, it operated smoothly in industrial systems.
Note: We are not manufacturers, we only repair.

We repair WAINTEK Make HMI (Model: MT607EMQV) that had a dead display and power-up failure. Testing revealed defective capacitors, regulator faults, and driver IC damage. These prevented the unit from functioning. Our engineers repaired the circuits and replaced the damaged components. After repair, the unit was tested thoroughly for reliability. The HMI performed well and achieved stable industrial operation.
Note: We are not manufacturers, we only repair.

We repair MEMCO GTAW 200 Welding Machine Display Card which failed to show readings and stopped responding. Testing confirmed IC faults, capacitor problems, and regulator issues. These faults prevented correct display of welding parameters. Our team carried out detailed circuit repairs and replaced the faulty components. After multiple test cycles, the display card performed reliably. The repaired unit was ready for welding machine applications.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView 600 HMI that was not booting and had touchscreen problems. Testing highlighted defective flash ICs, regulator faults, and capacitor issues. These prevented proper functioning of the HMI. Our engineers replaced the faulty components and corrected the circuits. After careful repair, the unit was tested under industrial conditions. The HMI then worked with stable and smooth performance.
Note: We are not manufacturers, we only repair.

We repair Perkin-Elmer Make HMI (PCB #0410293, ASSY #M0413322 REV C) which failed to display and had unstable operation. Testing showed IC faults, damaged capacitors, and power supply problems. These affected the smooth running of the HMI in its system. We repaired the circuits at micro-level and replaced faulty components. After repeated company-level testing, the HMI achieved reliable and consistent performance.
Note: We are not manufacturers, we only repair.