Manufacturing electronics repair services

We are repair TDK-Lambda SMPS ZWS10-12-J that showed unstable voltage. Our engineers inspected processor and regulator sections. Faulty electronic parts were replaced using advanced tools. After repair, the SMPS is working with stable performance. Please note, we are not manufacturers — we are doing only repair.

We specialize in repairing power supply cards, including various models and configurations. Our team of skilled engineers carefully analyzed the processor and regulator stages of the malfunctioning unit. After diagnosing the issues, we replaced the defective components with high-quality, tested parts.

Following the repair, extensive testing was conducted to ensure the card is now functioning as intended.

Please note: We are not the manufacturers of the power supply card. We provide only repair services for this and similar models.

We are repair SMPS MPI-810H that was experiencing abnormal output. Our engineers checked the regulation and I/O circuits. Damaged components were replaced for proper functioning. After engineering tests, the SMPS achieved smooth performance. Please note, we are not manufacturers — we are doing only repair.

We repair Micro Welding Machine H.F Card that had faults in high-frequency ignition and control signals. Testing showed IC failures, capacitor faults, and regulator issues. Our engineers repaired circuits with precision and replaced defective components. After repair, the card worked with reliable welding support.
Note: We are not manufacturers, we only repair.

The Bystronic Diocom Card failed with power sequencing errors. Micro-level inspection detected damaged drivers and regulator circuitry. With precise rework, the card regained proper performance. Our work is focused on repair services, not making new boards.

This Bystronic Laser CPU Board developed frequent system halts and failed boot sequences. Our engineers traced the fault to damaged processor circuits and clock drivers. Once repaired, the CPU board worked reliably under continuous load. Repair is our expertise — we do not manufacture.

This Eubanks Ribbon Cutting Machine Control Board had non-functional input/output channels and irregular performance. Diagnostics revealed shorted ICs and faulty relays. Once repaired, the board ran smoothly. We provide professional repair, not manufacturing.

We are repair Haas Automation Power Board which was not functioning properly due to faulty circuits. Engineers checked the board in detail and located defective regulators and capacitors. All damaged components were replaced with precision and tested thoroughly. The repaired board achieved stable and safe performance. Please note, we are not manufacturers — we are doing only repair.

We repair LED Differential Line Receiver PCB that failed in signal transmission and stability. Testing showed IC problems, regulator faults, and capacitor damage. Our engineers repaired the board and replaced faulty components. After company-level testing, the PCB worked reliably with stable results.
Note: We are not manufacturers, we only repair.

We are repair Haas 9061 Power Supply which was facing output failures and unstable power delivery. Our engineers examined switching circuits, I/O modules, and regulators carefully. Burnt sections were replaced with high-quality components using engineering expertise. The module passed full load testing and worked reliably after repair. Please note, we are not manufacturers — we are doing only repair.