Manufacturing electronics repair services

We are repairing PCB Cards used in Auto Seam Welding Machines, which were showing control errors and unstable operation. Our engineers carried out detailed circuit inspections and identified faults in power and driver IC sections. After repair, the card delivered stable and reliable performance during industrial operation.
Note: We are not manufacturers – we only provide repair services.

We repair AC Super Drive Motor Controller that had unstable performance and drive faults. Testing showed defective power circuits, IC failures, and capacitor issues. These faults disturbed smooth motor control. We repaired the circuit board and replaced all damaged parts. The unit was then tested under different motor load conditions. After repair, the controller achieved reliable performance.
Note: We are not manufacturers, we only repair.

We repair Miretti SCRC12-8 Firing Card that stopped working and failed to trigger properly. Testing revealed IC faults, damaged capacitors, and regulator problems. These faults disrupted its firing functions. Our team repaired the card at micro-level and replaced defective parts. After repair and testing, the firing card operated reliably. The repaired unit was fit for continued industrial use.
Note: We are not manufacturers, we only repair.

We tested a Mitsubishi Electric GS2110-WTBD-N HMI that faced power-up failure and unresponsive touch panel. Detailed analysis detected faulty flash memory and regulator faults. After replacing defective parts and conducting final testing, the unit regained reliable performance.
Note: We are not manufacturers, we only repair.

We worked on a Monitouch TS1070 HMI with screen flickering and keypad malfunction. Testing and circuit tracing revealed faulty driver ICs and shorted capacitors. After repair and performance checks, the panel delivered stable and smooth operation.
Note: We are not manufacturers, we only repair.

We repaired a Siemens MicroTech4 MT3106 Base Controller (POL688.80 MCQ) that was experiencing malfunction in control and communication functions. Our team carried out detailed diagnostics, identified defective circuit components and driver sections, and replaced them with high-quality parts. After repair, the controller was tested under simulated load conditions and performed reliably without errors. This ensures stable and efficient operation in building automation systems. Please note, we are not manufacturers — we provide repair services only.

We tested a T Line Etop05-0945 Panel that had display blackouts and unstable signals. Micro-level checks showed damaged ICs and capacitor failure. After precision replacement and testing, the panel became fully operational.
Note: We are not manufacturers, we only repair.

We repair UV Technik IIe BLP 60-LC 7500W Solid State AC Power Supply that failed in high load operations. Testing showed IC faults, regulator failures, and capacitor issues. Our engineers carried out repairs and replaced damaged parts. After repair, the unit delivered stable and efficient high-power output.
Note: We are not manufacturers, we only repair.

We repair T-505 Pinpoint Fault Locator that failed to detect correctly and showed unstable readings. Testing revealed damaged ICs, capacitor faults, and regulator issues. These affected accuracy in fault detection. Our engineers repaired the circuit board and replaced faulty components. After repair and testing, the locator provided stable and accurate performance.
Note: We are not manufacturers, we only repair.

We repaired a MEYER JOB PCB Card for Auto Shorter that was malfunctioning in its control and operation functions. Our team carried out detailed inspection, identified faulty electronic components, and replaced them with high-quality parts. After servicing, the PCB card was tested under working conditions and delivered stable, error-free performance. This ensures reliable operation within the auto shorter system. Please note, we are not manufacturers — we provide repair services only.