Manufacturing electronics repair services

We repair Selec MFM384 Multifunction Meter which showed incorrect readings and frequent display errors. Testing revealed IC faults, capacitor damage, and power circuit issues. These prevented proper monitoring. We repaired the circuits and replaced the faulty parts. After testing, the meter worked reliably with stable performance. The repaired unit was ready for continued use.
Note: We are not manufacturers, we only repair.

We repaired a Siemens S7-200CN PLC (Part Number: 216-2BD23-0XB8) that was showing faults in I/O processing and control functions. Our team conducted precise diagnostics, identified defective power and logic components, and replaced them with high-quality parts. After repair, the PLC was tested under simulated industrial conditions and performed reliably without errors. This ensures stable and efficient operation in automation systems. Please note, we are not manufacturers — we provide repair services only.

We repaired a Sonner M130 Controller that was experiencing failures in control and operation functions. Our team performed detailed diagnostics, located faulty components within the power and logic sections, and replaced them with high-quality parts. After servicing, the controller was tested under continuous operating conditions and delivered stable, error-free performance. This ensures dependable functioning in its industrial application. Please note, we are not manufacturers — we provide repair services only.

We repair Thermo Scientific Drive that had startup problems and unstable motor operation. Testing showed regulator faults, damaged ICs, and capacitor problems. These faults prevented proper functioning of the drive. We repaired the circuits and replaced all defective parts. After repair, the drive was tested under different load conditions. The unit performed reliably and consistently.
Note: We are not manufacturers, we only repair.

We are doing repair of CBO Controller that was showing irregular communication and power-related faults. Our engineers carried out detailed testing and found failures in drivers, logic ICs, and regulator circuits. After professional repairs, the controller delivered smooth and consistent functioning. If you need repair for this type of controller, contact us. Please note, we are not manufacturers — we are doing only repair.

We carried out testing on a Baur IRG 32 Panel that had control instability and power faults. Diagnosis revealed faulty regulators and defective ICs. After repairs and load testing, the panel performed reliably in simulated conditions.
Note: We are not manufacturers, we only repair.

We are repairing JUNGHEINRICH BOPT Head Controller, which faced issues in signal processing and control output. Our team conducted a detailed micro-level diagnosis and detected defective ICs, driver failures, and power section faults. After accurate component replacement, the controller operated with reliable and steady performance. If you want this type of repair service, contact us. Please note, we are not manufacturers — we are doing only repair.

We are repair and servicing Beckhoff CX5140 Embedded PCs to bring them back to dependable working condition. The process includes micro-level fault analysis, accurate component replacement, and step-by-step circuit verification. Functional testing and load performance checks are conducted to confirm stability. With strict quality control, we ensure a reliable outcome for your industrial systems. If you want service for such modules, we are ready to help.
We are not the manufacturer – we only provide repair services.

We are repairing Sonner Make Controller M130, which showed power faults and non-responsive controls. Our team carried out micro-level analysis to trace the exact problem, finding defective drivers, ICs, and capacitors. After targeted repairs, the controller functioned with stable and efficient operation. If you want repair for this type of controller, contact us. Please note, we are not manufacturers — we are doing only repair.

We repair CSD Instruments Surge Voltage Generator that failed in output generation and stability. Testing revealed IC faults, regulator issues, and capacitor problems. Our engineers repaired and replaced defective parts. After repair, the generator worked with dependable performance in industrial applications.
Note: We are not manufacturers, we only repair.