Manufacturing electronics repair services

We are doing repair of SMC-5900 Module, which had malfunctioning circuits and unstable operations. Our engineers analyzed the module and found issues in processor ICs, capacitors, and regulators. After corrective repairs, the module achieved consistent functionality for industrial use. If you want repair of this type of module, contact us. Please note, we are not manufacturers — we are doing only repair.

We tested a Siemens SIMATIC KP700 Comfort HMI Display which had touchscreen failure and unstable backlight. Diagnosis showed driver faults and capacitor damage. After replacement and company-level testing, the HMI regained reliable operation for industrial use.
Note: We are not manufacturers, we only repair.

We are doing repair of JOB SVT Card for Sesotec Machine, which had circuit failures and unstable operations. Our engineers carried out micro-level testing and identified faulty ICs, capacitor defects, and regulator problems. After repair work, the card functioned with consistent performance. If you need repair for such cards, contact us. Please note, we are not manufacturers — we are doing only repair.

We are repairing Dynisco ATC 990 Process Controller Module, which was showing process errors and power instability. Our team analyzed the module thoroughly, finding processor faults, driver failures, and regulator issues. After precise repairs, the module achieved smooth and reliable operation. If you want repair for this type of controller module, contact us. Please note, we are not manufacturers — we are doing only repair.

We repair FAGOR Drive ACO 15 used in welding seam grinding and polishing machines. The drive showed tripping faults and power failure. Testing confirmed IGBT faults, capacitor damage, and regulator issues. Our team repaired and replaced defective components. After repair, the drive was tested thoroughly under load. The unit worked with stable and reliable output.
Note: We are not manufacturers, we only repair.

We repair POWER SNC010-PS1 Card that failed in voltage regulation and circuit operation. Testing revealed IC faults, regulator failures, and capacitor issues. Our engineers repaired the circuits and replaced defective components. After repair, the card worked with reliable performance.
Note: We are not manufacturers, we only rep

We are repairing Techno CPU Card, which was facing frequent processing errors and unstable communication. Our team diagnosed the card in detail and detected defective ICs, regulators, and damaged drivers. With expert component replacement, the card delivered dependable performance. If you want repair of this type of CPU card, contact us. Please note, we are not manufacturers — we are doing only repair

We repair Pulling Machine Display that failed to power up and showed distorted output. Our engineers performed in-depth testing and identified regulator faults along with defective capacitors. These issues caused unstable performance in the machine. With precision repair, we replaced all faulty parts and corrected the circuits. The display was then tested in multiple cycles to confirm stability. After successful testing, the display became fully functional for continuous industrial operation.
Note: We are not manufacturers, we only repair.

We repair Power Card that failed in voltage regulation and circuit operation. Testing revealed IC faults, capacitor failures, and regulator issues. Our engineers repaired the circuits and replaced defective parts. After repair, the card delivered stable and reliable performance.
Note: We are not manufacturers, we only repair.

We are doing repair of CPU Boards from injection molding machines that showed frequent errors and inconsistent processing. Our engineers diagnosed memory and control IC failures. After precise circuit repairs, the board functioned accurately in production systems. We only provide repair service, not manufacturing.