Manufacturing electronics repair services

We repair Terit Sensor that failed to give proper readings. Testing revealed defective ICs, sensor faults, and capacitor issues. Our engineers repaired the circuits and replaced the faulty components. After repair and multiple tests, the sensor worked with stable and accurate performance.
Note: We are not manufacturers, we only repair.

We are repairing CPU Card PN.6363-CPU-001 PCB Assembly (SCB 680-4), which suffered from communication interruptions and booting issues. After in-depth diagnosis, our engineers identified memory IC and capacitor problems. Careful repairs helped the board to perform smoothly again. Repair only — not manufacturing.

We are doing repair of CPU Card PN.PFN003, which developed data processing errors. Circuit-level analysis revealed regulator IC faults and damaged components. With accurate repair work, the board achieved dependable performance. Please note, we are not manufacturers — we are only doing repair.

We repair Allen-Bradley PanelView Plus 1000 that suffered from booting issues and unresponsive touchscreen. Our engineers carried out detailed analysis and found damaged flash ICs and regulator faults. These defects caused the system to fail during operation. We replaced the defective ICs and repaired the regulator circuit. After the repair, the HMI was thoroughly tested for performance and stability. The unit delivered reliable operation and was ready for use in automation systems.
Note: We are not manufacturers, we only repair.

We repair Atlas Copco Elektronikon HMI (Serial: SRN1639A01518) that had power-up failure and unstable signals. Component-level testing revealed defective capacitors and problems in the power regulation. These faults prevented the unit from functioning correctly. Our engineers replaced all damaged components and corrected the power section. The unit was then tested repeatedly under company-level standards. After repair, the HMI achieved stable and consistent performance.
Note: We are not manufacturers, we only repair.

We repair Converter Concepts VL30-341-01/0 Power Supply that failed in voltage stability and output. Testing revealed IC faults, regulator failures, and capacitor damage. Our engineers repaired the circuits and replaced defective parts. After repair, the power supply worked reliably with stable performance.
Note: We are not manufacturers, we only repair.

We are repairing Mitsubishi Electric FX3U-48M PLCs experiencing unstable I/O operations and system errors. Our engineers carried out deep-level testing and detected processor and regulator faults. After component replacement and adjustments, the PLC performed dependably in automation use. We do not manufacture — we are doing only repair.

We are repair and servicing SENECA Z-4TC-D Temperature Modules with professional expertise. Our engineers analyze the module with advanced tools to trace failures at the circuit and component stage. After detection, defective parts are carefully replaced and verified through functional testing. The repaired module undergoes load and stability checks to confirm reliable operation. If you want to repair such modules, we can provide the service. We are not the manufacturer – we only provide repair services.

We are doing repair of Seifert Compressor Controllers that showed irregular control responses and circuit problems. By tracing defective ICs and regulator faults, our engineers successfully carried out component-level repairs. We only repair such units — not manufacture them.

We repair Siemens SIMATIC RAC PC that failed with startup errors and unstable communication. Testing confirmed IC faults, regulator issues, and capacitor failures. Our engineers repaired the circuits and replaced defective parts. After multiple tests, the unit delivered reliable and stable performance in automation systems.
Note: We are not manufacturers, we only repair.