Manufacturing electronics repair services

We repair Siemens SIMATIC Panel which had black screen issues and failed to respond to inputs. Detailed testing highlighted memory IC faults, damaged capacitors, and regulator problems. These caused malfunctions during automation processes. Our engineers carried out repairs with micro-level precision. After replacing the defective components, the panel was tested thoroughly. The SIMATIC panel then delivered smooth and reliable performance.
Note: We are not manufacturers, we only repair.

We repair Elektronikon Controller (Atlas Copco) that was not starting and showed unstable signals. Testing revealed defective capacitors, regulator issues, and IC failures. These prevented proper system operation in compressors. We carried out component replacement and corrected the power circuits. After multiple rounds of testing, the controller performed with stability. The repaired unit was ready for reliable industrial use.
Note: We are not manufacturers, we only repair.

We repair Becker 22KW 3 Phase AC Drive (Model SK22000-3CT) that failed in power and motor control. Testing revealed IC faults, regulator issues, and capacitor damage. Our engineers repaired the circuits and replaced faulty parts. After repair, the drive performed reliably with stable operation.
Note: We are not manufacturers, we only repair.

We are repairing EBERLE PLS 508 PLC Modules that suffered from control errors and unstable outputs. Our testing revealed regulator IC failures and circuit malfunctions. After part replacement, the PLC delivered dependable performance. If you need repair of such PLC modules, contact us. Please note, we are not manufacturers — we are doing only repair.

We repair Kicher.de BES-540C SMPS that failed in startup and voltage regulation. Testing revealed IC faults, regulator failures, and capacitor problems. Our engineers repaired the circuits and replaced defective parts. After repair, the SMPS delivered reliable and stable output.
Note: We are not manufacturers, we only repair.

We are repairing MicroTech® III Unit Controllers (MT3044, MT3005) that developed power fluctuations and processing errors. Our engineers identified faulty ICs and regulators. After replacement, the controller worked effectively in system applications. If you need repair of such controllers, contact us. Please note, we are not manufacturers — we are doing only repair.

We repair Nipron eNSP3-450P SMPS that failed in voltage regulation and startup. Testing revealed IC faults, capacitor damage, and regulator failures. Our engineers repaired the circuits and replaced defective parts. After repair, the SMPS worked reliably with stable output.
Note: We are not manufacturers, we only repair.

We repair HN Controller Unit of Auto Seam Welder (Model UK-GPSIN 88) that failed in machine control and signal response. Testing highlighted IC issues, capacitor faults, and regulator failures. Our engineers repaired and replaced defective parts. After repair, the controller worked with stable and smooth performance.
Note: We are not manufacturers, we only repair.

We repaired a Load Measurement Board used in sun simulators, which had signal distortion and calibration drift. Component-level faults were traced in the analog processing and sensor interface circuits. Post rectification, the board worked with stable measurement response. Repair is our domain — not manufacturing.

The PLC Module from AERZENER MASCHINENFABRIK developed boot-up and logic execution faults. Our team used advanced diagnostic tools to identify component-level breakdown in control circuitry and clock sections. The repaired module performed with accuracy after reassembly. We focus purely on repairs, not manufacturing.