We repair B-Command Rotary Limit Switch FRM which had mechanical faults and unstable signal output. Testing revealed worn contacts, defective gears, and damaged electronic components. These faults caused incorrect position feedback in automation systems. Our team carried out precision repairs and replaced damaged parts. After calibration and repeated testing, the switch performed accurately. The repaired unit achieved reliable operation in its industrial application.
Note: We are not manufacturers, we only repair.

We repair Thines Clima Ultrasonic Anemometer 2D which had unstable wind measurement and signal drop. Testing revealed defective sensor circuits, damaged ICs, and regulator faults. These faults affected correct data transmission. We repaired the circuits and replaced the faulty components. The anemometer was then tested in multiple conditions. After repair, it delivered stable and accurate wind data.
Note: We are not manufacturers, we only repair.

We repair Baumer Incremental Encoder (HOG9 DN 2048 I) that failed to give stable pulse output. Testing confirmed sensor faults, damaged capacitors, and IC issues. These faults disrupted speed and position feedback. We repaired the circuits and replaced faulty components with care. After repair, the encoder was tested on precision equipment. The unit delivered stable and accurate signals.
Note: We are not manufacturers, we only repair.

We repair Hengstler Encoder (AC58I1213EK.42SNX: 6017) that showed incorrect pulse generation. Testing confirmed sensor element failure, damaged ICs, and capacitor faults. These affected accurate feedback in automation. We performed component replacement and carried out detailed circuit repairs. After calibration and testing, the encoder provided precise and stable output. The repaired unit was fit for reliable industrial applications.
Note: We are not manufacturers, we only repair.

We repair ebm-papst Centrifugal Fans PCB (W3G630-GU31-03) that failed due to power supply issues. Testing revealed damaged ICs, capacitor faults, and regulator problems. These defects disrupted smooth motor control. Our team carried out detailed PCB repair and replaced the faulty components. After repair, the fan PCB was tested thoroughly. The unit achieved stable and efficient performance.
Note: We are not manufacturers, we only repair.

We repair Leine Linde Encoder (Model: 703) that was not giving correct output signals. During testing, faulty ICs, sensor head issues, and power circuit faults were identified. These caused signal instability during machine operation. Our engineers repaired the unit at micro-level and replaced defective components. After completing calibration and testing, the encoder worked with high accuracy. The repaired unit was suitable for industrial use again.
Note: We are not manufacturers, we only repair.

We repair Ziehl-Abegg IGBT Cooling Fan (IE137-04) that stopped working and had unstable motor performance. Testing showed power circuit faults, capacitor failures, and regulator issues. These caused overheating and malfunction. Our engineers repaired the PCB, replaced defective parts, and tested the fan under load. After repair, the cooling fan achieved smooth and reliable operation.
Note: We are not manufacturers, we only repair.

We repair Lambrecht Meteo Wind Speed Sensor that was showing incorrect readings and frequent dropouts. Testing confirmed sensor faults, capacitor issues, and IC problems. These affected the reliability of weather monitoring. We repaired the circuits and replaced faulty parts with care. After calibration and testing, the sensor provided accurate and stable output. The unit was restored for continuous environmental monitoring.
Note: We are not manufacturers, we only repair.

We repair HF Card for Auto Seam Welding Machine which failed to control welding operations. Testing confirmed defective ICs, regulator faults, and capacitor failures. These issues caused unstable welding current. Our engineers repaired the circuit board and replaced all faulty parts. After repair, the card was tested in simulated welding conditions. The unit achieved smooth and accurate performance.
Note: We are not manufacturers, we only repair.

We repair Watson Marlow 620s Peristaltic Pump that had motor drive failure and unstable speed control. Testing revealed regulator issues, capacitor faults, and IC damage. These prevented correct pump operation. We carried out component replacement and circuit repair. The pump was tested under load conditions to confirm stability. After repair, it delivered reliable and accurate pumping performance.
Note: We are not manufacturers, we only repair.