We repair Selec MFM384 Multifunction Meter which showed incorrect readings and frequent display errors. Testing revealed IC faults, capacitor damage, and power circuit issues. These prevented proper monitoring. We repaired the circuits and replaced the faulty parts. After testing, the meter worked reliably with stable performance. The repaired unit was ready for continued use.
Note: We are not manufacturers, we only repair.

We repair Pilz Safety Relay PNOZ s50 that failed to perform safe brake control. Testing revealed regulator faults, capacitor problems, and IC issues. These prevented proper relay operation. We carried out component-level repairs and corrected the circuits. After repair, the relay was tested under company standards. The unit worked reliably with accurate safety functions.
Note: We are not manufacturers, we only repair.

We repair T-505 Pinpoint Fault Locator that failed to detect correctly and showed unstable readings. Testing revealed damaged ICs, capacitor faults, and regulator issues. These affected accuracy in fault detection. Our engineers repaired the circuit board and replaced faulty components. After repair and testing, the locator provided stable and accurate performance.
Note: We are not manufacturers, we only repair.

We repair Electronet Level Transmitter (Model No. LCT-01) that gave inaccurate level readings. Testing revealed sensor faults, IC damage, and capacitor failures. These caused unstable output signals. We repaired the circuits and replaced faulty components. After calibration and testing, the transmitter achieved accurate and consistent readings. The repaired unit was fit for industrial use again.
Note: We are not manufacturers, we only repair.

We repair Stepping Motor Drive X-Mind B6 that showed faults in signal response and motor synchronization. Our engineers detected defective ICs, damaged capacitors, and regulator issues during testing. These faults disturbed precise motor control. After component replacement and circuit correction, the drive was tested under company-level standards. It then worked smoothly and reliably for industrial applications.
Note: We are not manufacturers, we only repair.

We repair Crowbar Controller WTCBA200A that had tripping faults and unstable protection response. During testing, we found defective ICs, faulty diodes, and damaged capacitors. These caused irregular functioning in safety applications. We carried out detailed circuit-level repair and replaced the faulty components. After company-level testing, the controller operated with stable protection response.
Note: We are not manufacturers, we only repair.

We repair Kubler Encoder (8.5020.0052.2500.S102) which failed to deliver proper pulse signals. Testing showed sensor faults, defective ICs, and regulator damage. These disturbed accuracy in machine operations. After precision repairs and part replacement, the encoder was tested multiple times. The unit then achieved reliable and stable functionality.
Note: We are not manufacturers, we only repair.

We repair Bachmann 7 Slot Base Plate that showed connectivity problems and unstable module response. Testing highlighted damaged connectors, regulator faults, and capacitor issues. These caused communication failure in automation racks. Our engineers repaired and replaced the defective components. After repair, the base plate performed with reliable and smooth operation.
Note: We are not manufacturers, we only repair.

We repair Baumer Encoder HOG86.2 P16-017-1 used in ABB Generators. The unit failed to give stable feedback signals. Testing revealed faulty sensor elements, IC failures, and capacitor damage. Our engineers repaired and replaced the faulty parts. After repair, the encoder was tested under company-level standards. It then delivered precise and dependable performance.
Note: We are not manufacturers, we only repair.

We repair Baumer Encoder GI357.A70C323N that had unstable signal output and failure in communication. Circuit testing confirmed sensor faults, damaged ICs, and regulator issues. These disturbed its operation in automation systems. After detailed repair and replacement, the encoder was tested thoroughly. The unit performed with stable and accurate results.
Note: We are not manufacturers, we only repair.