We repair Condor GPC80P-107 Power Supply that failed in stable voltage output and circuit operation. Testing revealed IC faults, regulator issues, and capacitor failures. Our engineers repaired the circuits and replaced defective parts. After repair, the power supply worked reliably with stable performance.
Note: We are not manufacturers, we only repair.

We are repair Emacs SMPS MRM-6650P-R that had irregular voltage and shutdown problems. Our engineers diagnosed faults in the regulation path and processor control. Damaged components were carefully replaced with quality-tested parts. After load trials, the SMPS achieved consistent performance. Please note, we are not manufacturers — we are doing only repair.

We are repair Bystronic Power Supply Card that had malfunction issues. Our engineers analyzed processor and regulator stages. Defective parts were replaced with quality-tested components. The board is now functioning properly after repair. Please note, we are not manufacturers — we are doing only repair.

We are repair Branson Power Board that was failing with unstable signals. Our engineers analyzed circuits and regulation paths. Defective components were identified and replaced with precision. After engineering repair, the board performed smoothly. Please note, we are not manufacturers — we are doing only repair.

We are repair Dell SMPS N875EF-00 (NPS-875BB A) which was failing due to unstable output and power fluctuations. Engineers examined the switching stage, I/O interface, and processor control circuits carefully. Defective parts were desoldered and replaced with new reliable components. After engineering tests, the SMPS delivered steady performance under load. Please note, we are not manufacturers — we are doing only repair.

We are repair High Voltage Trigger PCB which was failing under load. Our engineers checked the high-voltage circuits carefully. Burnt and damaged parts were replaced. After repair, the PCB is operating reliably. Please note, we are not manufacturers — we are doing only repair.

We are repair Phoenix Contact TRIO SMPS which was malfunctioning. Our engineers tested the circuits and found damaged parts. Regulation errors were corrected with expert repair. After checks, the supply is running smoothly. Please note, we are not manufacturers — we are doing only repair.

We are repair SMPS MPI-810H that was experiencing abnormal output. Our engineers checked the regulation and I/O circuits. Damaged components were replaced for proper functioning. After engineering tests, the SMPS achieved smooth performance. Please note, we are not manufacturers — we are doing only repair.

We are repair Lite-On SMPS PA-2041-1 which was facing unstable voltage and output cut-off problems. Our engineers inspected the input, regulation, and I/O circuits at micro level. Faulty capacitors and weak regulation components were identified and replaced with precision. After detailed testing under load, stable performance was achieved with consistent signals. Please note, we are not manufacturers — we are doing only repair.

We are repair Astec Power Supply Board which was suffering from unstable regulation and repeated faults. Engineers checked every section including input filters, regulators, and processors. Faulty circuits were replaced with care to ensure durability and proper function. After repair, load tests confirmed steady and safe performance. Please note, we are not manufacturers — we are doing only repair.