We are repair Sanken VE027 SMPS that failed due to unstable output and irregular function. Our engineers tested regulation paths and processor signals. Faulty components were replaced with expert engineering methods. After checks, the supply is running reliably again. Please note, we are not manufacturers — we are doing only repair.

We are repair Leader Electronics 5V 2Amp SMPS that was not regulating properly. Our engineers performed detailed circuit testing. Defective components were replaced during repair. The SMPS achieved stable output after rechecking. Please note, we are not manufacturers — we are doing only repair.

We are repair JM6685 Label Printer SMPS with faulty voltage output. Our engineers carried out circuit-level testing. Damaged components were replaced to restore stability. After engineering checks, the unit worked reliably. Please note, we are not manufacturers — we are doing only repair.

We are repair Dell SMPS H235PD-02 which had inconsistent output and sudden shutdown faults. Our engineers carried out detailed circuit tracing to locate the damaged regulator and processor sections. The defective components were carefully replaced and soldered for long-term reliability. The unit was fully tested for stable operation and safe functionality. Please note, we are not manufacturers — we are doing only repair.

We are repair Cisco Milan Plus AC-DC Power Supply 34-1535-01 that showed power faults and signal failures. Engineers examined the board and identified faults in regulation ICs and capacitors. Defective components were replaced with suitable parts using precision engineering methods. Testing confirmed steady signals and consistent power output for reliable use. Please note, we are not manufacturers — we are doing only repair.

We are repair TDK-Lambda SMPS ZWS10-12-J that showed unstable voltage. Our engineers inspected processor and regulator sections. Faulty electronic parts were replaced using advanced tools. After repair, the SMPS is working with stable performance. Please note, we are not manufacturers — we are doing only repair.

We are repair Astec Power Supply AA20850 that suffered from unstable regulation and frequent shutdown. Our engineers performed micro-level diagnosis across input circuits and output regulators. Damaged semiconductors and weak control ICs were identified and replaced accurately. Final load testing confirmed consistent power delivery and safe operation. Please note, we are not manufacturers — we are doing only repair.

We are repair Cisco 2960 SMPS that was not delivering correct voltage and had faulty startup. Our engineers carried out diagnosis of power stages, switching ICs, and output filters. Defective parts were isolated, replaced, and calibrated for stable operation. After quality engineering checks, the module worked with consistent performance. Please note, we are not manufacturers — we are doing only repair.

We are repair Siemens SITOP Power Supply 6EP1 437-3BA00 with faulty three-phase regulation. Our engineers checked input, control, and regulator circuits. Defective power components were replaced after diagnosis. The SITOP supply now works stably under industrial loads. Please note, we are not manufacturers — we are doing only repair.

We are repair Extreme Networks SMPS PS2431-YE that was showing irregular voltage and failed power startup. Engineers analyzed the input filters, switching circuits, and processor signals in depth. They detected burnt regulators and faulty capacitors, which were replaced with quality components. After multiple rounds of engineering checks, the SMPS is stable and reliable. Please note, we are not manufacturers — we are doing only repair.