We are repair Lambda FW G0050 Power Supply which had frequent shutdowns and unstable regulation. Engineers inspected the circuits carefully to locate defective components. Faulty regulators and weak capacitors were replaced using proper methods. The power supply performed steadily after load tests. Please note, we are not manufacturers — we are doing only repair.

We are repair Condor Power Supply SP1411 which had failed due to faulty circuits and unstable regulation. Our engineers checked the processor, regulator, and input sections thoroughly. Defective capacitors and control ICs were replaced for stable functioning. After repair, the supply was tested and confirmed for reliable performance. Please note, we are not manufacturers — we are doing only repair.

We are repair OKIN 29VDC 2Amp Power Supply SP2-A which was suffering from unstable output. Our engineers traced faults in the regulation circuits and input section. Burnt capacitors and faulty ICs were replaced with high-quality parts. After repair and testing, the unit performed with consistent reliability. Please note, we are not manufacturers — we are doing only repair.

We are repair Delta Electronics Power Supply DPSN-210AB A that was failing to deliver proper voltage. Engineers inspected switching circuits, I/O modules, and regulator areas carefully. Defective components were replaced using accurate engineering techniques. After detailed checks, the unit worked with stable and safe performance. Please note, we are not manufacturers — we are doing only repair.

We are repair Lite-On SMPS PA-2041-1 which had problems with output cut-off and unstable regulation. Engineers diagnosed switching modules and control circuits at micro level. Faulty components were replaced and calibrated for smooth performance. After full testing, the SMPS worked efficiently under load. Please note, we are not manufacturers — we are doing only repair.

We are repair Shimadzu LC-8A Pump’s Power Supply Board PC-3 that was not working properly. Engineers carried out detailed testing of the regulation section and switching circuits. Damaged semiconductors and capacitors were identified and replaced carefully. After final load tests, the board performed smoothly and consistently. Please note, we are not manufacturers — we are doing only repair.

We are repair Condor Power Supply SP1725 which was showing power instability and startup issues. Engineers examined the regulator, input, and processor circuits step by step. Faulty ICs and weak capacitors were replaced with durable components. After testing under load, the supply achieved reliable performance. Please note, we are not manufacturers — we are doing only repair.