Wind Energy Electronics Repair Services

We repair Phoenix Contact PS-1AC-24DC-5 power supply that failed in output regulation and startup. Testing revealed regulator faults, capacitor issues, and IC failures. Our engineers repaired and replaced defective parts. After repair, the unit worked with smooth and consistent power delivery.
Note: We are not manufacturers, we only repair.

We repair Delta Electronics EOE12010002 24V 5A power supply that failed in output stability and overvoltage. Testing highlighted IC problems, regulator faults, and capacitor damage. Our team repaired circuits and replaced faulty components. After testing, the supply performed with reliable and accurate results.
Note: We are not manufacturers, we only repair.

We repaired an SSB WIND Systems BFL170 Relay that was showing malfunction in switching operations. Our team conducted precise testing, identified faulty relay contacts and driver components, and replaced them with quality parts. After repair, the relay performed reliably under continuous load. Please note, we are not manufacturers — we provide repair services only.

We repair Weidmuller PRO MAX 240W 24V 10A power supply that failed with no output and unstable voltage. Testing showed IC faults, regulator issues, and capacitor failures. Our engineers repaired the circuits and replaced defective parts. After repair, the supply delivered reliable and stable 24V output.
Note: We are not manufacturers, we only repair.

We repair SSB Wind Systems BC288-1 Battery Charger that failed in charging cycle and voltage regulation. Testing confirmed IC faults, regulator problems, and capacitor failures. Our engineers repaired the circuits and replaced faulty parts. After repair, the charger worked with reliable battery charging performance.
Note: We are not manufacturers, we only repair.

We repaired an Allen-Bradley Micro850 PLC (2080-LC50-24QBB) that was facing malfunction in input/output processing and control execution. Our team performed systematic testing, traced the issue to faulty I/O circuits and power section components, and replaced them with reliable parts. After servicing, the PLC was tested in simulated industrial conditions and performed consistently without errors. This ensures dependable operation in automation systems. Please note, we are not manufacturers — we provide repair services only.

We repair B-Command Rotary Limit Switch FRM which had mechanical faults and unstable signal output. Testing revealed worn contacts, defective gears, and damaged electronic components. These faults caused incorrect position feedback in automation systems. Our team carried out precision repairs and replaced damaged parts. After calibration and repeated testing, the switch performed accurately. The repaired unit achieved reliable operation in its industrial application.
Note: We are not manufacturers, we only repair.

We repair Leine Linde Encoder (Model: 703) that was not giving correct output signals. During testing, faulty ICs, sensor head issues, and power circuit faults were identified. These caused signal instability during machine operation. Our engineers repaired the unit at micro-level and replaced defective components. After completing calibration and testing, the encoder worked with high accuracy. The repaired unit was suitable for industrial use again.
Note: We are not manufacturers, we only repair.

We repair ebm-papst Centrifugal Fans PCB (W3G630-GU31-03) that failed due to power supply issues. Testing revealed damaged ICs, capacitor faults, and regulator problems. These defects disrupted smooth motor control. Our team carried out detailed PCB repair and replaced the faulty components. After repair, the fan PCB was tested thoroughly. The unit achieved stable and efficient performance.
Note: We are not manufacturers, we only repair.

We repair Hengstler Encoder (AC58I1213EK.42SNX: 6017) that showed incorrect pulse generation. Testing confirmed sensor element failure, damaged ICs, and capacitor faults. These affected accurate feedback in automation. We performed component replacement and carried out detailed circuit repairs. After calibration and testing, the encoder provided precise and stable output. The repaired unit was fit for reliable industrial applications.
Note: We are not manufacturers, we only repair.