We are repair and servicing Agilent Communication PCBs with expert care. Our engineers perform diagnostics to identify communication faults, replace defective components, and carry out circuit-level corrections. Each PCB is tested to ensure stable data communication performance. If you want to repair such modules, we can provide the service. We are not the manufacturer – we only provide repair services.

We repair D2 Lamp PCB from Agilent 1260 Infinity Detector that failed with unstable light output and circuit issues. Testing showed IC faults, capacitor failures, and regulator problems. Our engineers repaired and replaced defective components. After repair, the PCB worked with reliable performance in lab operations.
Note: We are not manufacturers, we only repair.

We repair Pass Box Interlocking Systems Controller that showed control faults and unstable operation. Testing revealed IC failures, capacitor damage, and regulator faults. Our engineers repaired the circuits with precision and replaced the defective parts. After repair, the unit was tested for functionality. The controller then worked reliably in industrial use.
Note: We are not manufacturers, we only repair.

We repair Alan Battery Charger that failed with charging faults and unstable voltage. Testing revealed IC problems, capacitor damage, and regulator failures. Our engineers repaired the charger and replaced defective components. After repair, the unit worked with dependable charging performance.
Note: We are not manufacturers, we only repair.

We are repair and servicing Allen-Bradley Analog Combination IO Modules (SLC 500) for industrial applications. Detailed fault inspection, component replacement, and functionality checks are performed during the repair process. Each module is tested under load to verify consistent input/output performance. Our repair service provides a cost-saving alternative to replacement. If you need repair for such IO modules, we can support you.
We are not the manufacturer – we only provide repair services.

We repair Allen-Bradley PowerFlex AC Drive that had tripping faults and unstable output. Testing showed IGBT failures, regulator problems, and capacitor faults. These affected drive performance in machines. Our team repaired circuits and replaced defective parts. After testing under load, the drive worked with stable and reliable operation.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView Plus 400 HMI that was unresponsive and not booting. Testing showed regulator faults, flash IC problems, and capacitor failures. These issues prevented the unit from starting up properly. We repaired the circuits and replaced the defective ICs. The HMI was tested in multiple cycles for reliable performance. After repair, it operated smoothly in industrial systems.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PowerFlex 4M AC Drive that was not powering up and showed drive faults. Testing revealed regulator issues, IGBT faults, and capacitor failures. These caused motor operation problems. We repaired the circuits and replaced defective components. After repair, the drive was tested under industrial conditions. The unit performed reliably with stable motor control.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView Plus 1000 that suffered from booting issues and unresponsive touchscreen. Our engineers carried out detailed analysis and found damaged flash ICs and regulator faults. These defects caused the system to fail during operation. We replaced the defective ICs and repaired the regulator circuit. After the repair, the HMI was thoroughly tested for performance and stability. The unit delivered reliable operation and was ready for use in automation systems.
Note: We are not manufacturers, we only repair.

We repair Allen-Bradley PanelView 600 HMI that was not booting and had touchscreen problems. Testing highlighted defective flash ICs, regulator faults, and capacitor issues. These prevented proper functioning of the HMI. Our engineers replaced the faulty components and corrected the circuits. After careful repair, the unit was tested under industrial conditions. The HMI then worked with stable and smooth performance.
Note: We are not manufacturers, we only repair.