We repaired a MEYER JOB PCB Card for Auto Shorter that was malfunctioning in its control and operation functions. Our team carried out detailed inspection, identified faulty electronic components, and replaced them with high-quality parts. After servicing, the PCB card was tested under working conditions and delivered stable, error-free performance. This ensures reliable operation within the auto shorter system. Please note, we are not manufacturers — we provide repair services only.

We repair MITROL CAX4120H Cards with communication and output signal issues. Diagnostics revealed faulty ICs, interface circuit problems, and power section faults. These caused unstable system performance. Micro-level repair and component replacement were carried out. After testing, the card operated accurately.
Note: We are not manufacturers; we only repair.

We repair MITROL CDB2020 Cards with feedback errors and intermittent operation. Fault analysis showed sensor interface issues, faulty ICs, and power supply defects. These caused unstable performance. Micro-level repairs and replacements were completed. After testing, the card functioned reliably.
Note: We are not manufacturers; we only repair.

We repair Mitrol CDB 1208 Cards showing control malfunction and signal instability. Testing identified damaged components, IC failures, and power circuit issues. These faults affected machine operation. Our engineers performed micro-level repairs. After calibration and testing, the card was restored for industrial use.
Note: We are not manufacturers; we only repair.

We carried out detailed testing of a Markem-Imaje Smartdate X60 HMI which was experiencing display malfunction and unstable operation. Through micro-level diagnosis we identified faulty ICs, damaged capacitors, and power regulation faults. After replacing defective parts and completing performance testing, the HMI regained stable performance and is now suitable for reliable industrial use.
Note: We are not manufacturers, we only repair.

We repair Masibus TCS4050M Source Meter that failed with unstable readings and power issues. Testing revealed IC faults, capacitor problems, and regulator failures. Our team repaired the circuits and replaced defective parts. After repair, the source meter performed smoothly and accurately.
Note: We are not manufacturers, we only repair.

We are repair and servicing Masterflex Pumps (Model No. 77200-60). Repairs involve checking electronics, restoring circuit function, and verifying pumping accuracy. The service helps extend pump life and ensures stable operation in laboratory use.
We are not the manufacturer – we only provide repair services.

We are repair Matrix Power Supply SN.0000007866 which was failing due to unstable output. Our engineers inspected processor areas, feedback loops, and regulation stages. Faulty circuits and weak parts were identified during detailed testing. After proper engineering repair, the supply is stable and reliable again. Please note, we are not manufacturers — we are doing only repair.

We are repair Mean Well SMPS S-150-24 which had issues with low voltage output and faulty startup. Engineers diagnosed power circuits and switching regulators carefully. Burnt parts and weak capacitors were replaced with durable components. Testing confirmed reliable power delivery and long-term safe usage. Please note, we are not manufacturers — we are doing only repair.

We are repair and servicing Auto Clave PLC Data Loggers with technical expertise. The repair process begins with complete fault analysis and identification of hardware or circuit issues. Damaged or faulty components are replaced and tested thoroughly. After service, data recording accuracy and stability are verified. If you want to repair such modules, we can provide the service. We are not the manufacturer – we only provide repair services.