We repair TDK JBW05-3R0 SMPS units with output failure and regulation issues. Testing identified faulty switching devices, damaged ICs, and control circuit faults. These caused unstable power output. Micro-level repairs were completed. After testing, the SMPS operated reliably. The unit is suitable for industrial use.
Note: We are not manufacturers; we only repair.

We repair TDK-Lambda ZWS150BAF-24R SMPS with no-power and voltage drop issues. Diagnostics revealed power section damage, IC failure, and regulation faults. These caused unstable operation. Our engineers carried out micro-level repairs. After testing and calibration, the SMPS functioned properly. The unit is ready for industrial application.
Note: We are not manufacturers; we only repair.

We repaired a Teledyne Analytical Instruments B74671A PCB that was showing malfunctions in system processing and control operations. Our team carried out detailed diagnostics, identified defective ICs and supporting electronic components, and replaced them with high-quality parts. After repair, the board was tested under operational conditions and delivered stable, error-free performance. This ensures dependable functioning within Teledyne Analytical Instruments systems. Please note, we are not manufacturers — we provide repair services only.

We repair Thines Clima Ultrasonic Anemometer 2D which had unstable wind measurement and signal drop. Testing revealed defective sensor circuits, damaged ICs, and regulator faults. These faults affected correct data transmission. We repaired the circuits and replaced the faulty components. The anemometer was then tested in multiple conditions. After repair, it delivered stable and accurate wind data.
Note: We are not manufacturers, we only repair.

We repair TDK-Lambda AGM130 SMPS that failed with startup faults and unstable voltage. Testing revealed IC issues, capacitor damage, and regulator faults. Our engineers repaired circuits with precision and replaced defective components. After testing, the SMPS performed reliably with stable output.
Note: We are not manufacturers, we only repair.

We tested a T Line Etop05-0945 Panel that had display blackouts and unstable signals. Micro-level checks showed damaged ICs and capacitor failure. After precision replacement and testing, the panel became fully operational.
Note: We are not manufacturers, we only repair.

We repair TDK-Lambda NV-350 Power Supply that failed with no output and unstable performance. Testing confirmed IC failures, regulator faults, and capacitor damage. Our engineers repaired and replaced defective parts. After testing, the unit worked reliably in industrial operations.
Note: We are not manufacturers, we only repair.

We repaired a Teledyne ASSY C75825 Control Board that was showing faults in control and signal processing functions. Our team conducted thorough diagnostics, identified damaged electronic components, and replaced them with high-quality parts. After repair, the board was tested under operational conditions and delivered stable, reliable performance. This ensures dependable functioning within the equipment system. Please note, we are not manufacturers — we provide repair services only.

We repair Thermo Scientific Drive that had startup problems and unstable motor operation. Testing showed regulator faults, damaged ICs, and capacitor problems. These faults prevented proper functioning of the drive. We repaired the circuits and replaced all defective parts. After repair, the drive was tested under different load conditions. The unit performed reliably and consistently.
Note: We are not manufacturers, we only repair.

We are repair and servicing Teledyne ASSY B79153 Amplifier Boards. Service includes analyzing faults in amplification circuits, repairing damaged PCB areas, and ensuring accurate signal output. If you want to repair such boards, we can provide the service. We are not the manufacturer – we only provide repair services.